Help · Everyday work
Calibration
Set up gauge types and gauges, record calibrations and handle a gauge that fails.
The Calibration module tracks every gauge, when it is next due and the readings from each calibration.
Set up gauge types
Under Settings → Data Management → Calibration, add a gauge type. A type has a code, a name, a calibration interval and the checks a calibration records (for example, a measured value with a nominal and tolerance, or a pass/fail attribute).
You can link a calibration procedure, which is a controlled document of the built-in Calibration procedure type, so people always work from the current revision.
New gauges copy their type’s checks. If you add a check to a type later, Apply the checks to them adds it to existing gauges.
Add gauges
Under Calibration → Gauges add each gauge with its type and site. The register shows the next due date, and the dashboard shows what is due, overdue or quarantined.
Record a calibration
Open a gauge and choose to record a calibration. For each check, enter the as-found reading, and an as-left reading if the gauge was adjusted. Each box turns green with a tick when in tolerance and red with a cross when not. The outcome (pass, adjusted or fail) is worked out for you.
External calibrations also take a certificate number and files.
When a gauge fails
A failed calibration quarantines the gauge and a passing one releases it. The record can raise a non-conformance in one click, linked to the calibration. An impact report lists the inspections that used the gauge, so you can see what to re-check.
Importing
Gauge types and gauges can be imported from a file. Calibration records themselves are not imported.